Silver Wheels - Commercial Truck Sprayers

.
Silverwheels Commercial Truck Sprayers

Hydra-Skid Models
Single and Double Fold Booms

Field Cushion™ Boom Suspension

Exclusive suspension system eliminates sprayer boom whip over rough terrain. Its patented design controls vertical shock and rocking motion. The Field Cushion™ shock absorbing system reduces stress on boom structure, promotes longer boom life and provides more consistent spray application.
Hydra-Lock Boom Positioning
Hydraulic fold booms use advance electro-hydraulic custom made valve bodies that give five-way boom position control. Hydra-Lock is a device built into the valve body to keep the boom from drifting or settling.

45' & 48' single fold

hydraulic fold with wing tilt and hydraulic tower

Breakaway on main hinge

55 & 60' double fold

Hydraulic fold with wing tilt and hydraulic tower

Breakaway on secondary hinge

Standard features include:

TeeJet® single nozzle bodies

No. of nozzle bodies:

	45' - 27	55' - 33
	48' - 29	60' - 37

1" boom feed lines

1" Bango™ inline strainers

Ring style nozzle protector at boom ends

XR TeeJet® spray tips

Wings tilt above and below center

Optional features include:

Stainless steel product tank

1" stainless steel boom lines

Product pumpoff kit

3-way Turret nozzles

Electric fenceline kit

Turbo Drop™ non-drift nozzles

Pickup Truck Sprayers ... Standard Features

Slide-in unit with 500 gallon poly tank, 4" deep sump, heavy duty frame, cradle and straps
dual agitation
45' manual fold boom (hydraulic option) with 3/4" hoses, stainless steel clamps, diaphragm check valves, TeeJet® bodies and caps, XR flat spray tips, 110° spray angle
Patented Field Cushion™ boom suspension system with boom winch
3 section electric sprayer controls
3 gallon clean water dispenser
choice of engines and pumps
2" fast fill valve

Precision Control. Driving Performance. Demand Controlled POWER SYSTEM Saves power and fuel...reduces pump wear...and runs cooler!
Load Sensing Hydraulics Miller Application Technologies load sensing hydraulics is a major component of a completely demand driven power system. Its hydraulic pump puts out only the amount of oil called for. This requires less horsepower and creates less heat than open center hydraulic pumps which run at maximum capacity full time. High Performance Demand Driven Product Pump The 100 gpm product pump also operates on a demand basis, pumping only the amount of liquid required at that precise moment. An electrically operated hydraulic flow control, operated by a Raven monitor adjusts oil flow to the product pump. Other systems require their pumps to run at full capacity, and bypass the unneeded volume back into the tank. The Miller demand sensing system reduces wear on both the hydraulic and the product pumps.		Insta-Response Monitoring The Raven monitoring system and the Miller demand sensing system together create an Insta-Response monitor that senses changes in ground speed and flow requirements...and corrects the output instantly! Lag time when starting at the beginning of each pass has been eliminated. Other systems have a much slower 2-3 second response time. Traveling at 10 mph covers about 15 feet each second. Demand Sensing Boom Control Valve Provides effective constant boom pressure, even when one or two sections are shut down. 1" lines between the control valve and the boom assures high volume with minimal pressure loss at the boom nozzles.
Convenient console mounted joystick Controls The fingertip controls for all functions of operation are conveniently located next to the driver. 5-way boom fold control 3-section boom shutoff with master switch foam marker control Raven 440 controller with radar	Quality Performance Features
	Boom Tracker foam marking system 25 gallon tank, optional 10 gallon diaphragm compressor and collector heads Mixes foam at boom ends for much quicker response from side to side	Teejet™ 3-section manifold style electric control 3 Teejet electric ball valves 1" boom feed lines 3 - 1" inline strainers 2" main line filter Breakaway Wings automatically return to operating position	Construction Sprayer frame structurally integrated with truck frame Optional frame suspension air bags keep truck level with heavy loads, can be adjusted for load requirements Electric fence line kit and stainless steel boom lines
50 gallon fresh water flush system flush pump, controls and boom only...or the entire system including the tank	Tanks 500 gal elliptical poly tank twin agitation & sight gauge optional 500 gallon stainless steel elliptical tank with removable sparger ACE hydraulic 206 pump 100 gpm provides high flow and high pressure Optional Hypro 9303C-HM4	Chemical inductor stainless steel cone accepts dry flowables Fast fill with 2" valve and coupler Optional 2" pumpoff kit for transferring loads	Clean water system 25 gallon tank 60 psi / 3 gpm Shur/Flo™ pump trigger handgun with 25' hose faucet for cleaning hands and rinsing containers

MILLER HOME PAGE	511 E Main St. St. Nazianz, WI. 54232-0127 1.800.247.5557