.

511 E Main St.  St. Nazianz, WI.  54232-0127  1.800.247.5557 


7400 & 7600 International Chassis...
Easy conversion

from liquid application
to dry systems


Full season application
Silver Wheels International chassis models offer versatility for season long application performance.

1 pre-emerge flotation 2 post-emerge row crop   3 dry application

 

Performance, power and reliable service
Move quickly from one field to the next, and in and out of fields easily with these Silver Wheels application rigs. They’ve built a reputation for having rugged stability and the reliability to work for you day in and day out. Chassis service is available at over 1,000 locations.

Front mounted hydraulic pump.

AirRide cab offers more comfort, better control

The 7000 series Silver Wheels enhanced AirRide cab is 4" longer than the previous model, providing more head and midsection room. It features a wraparound dash, and controls are within easy reach. The new cab design is also 33% quieter.

7400 International Floater Chassis Specifications
ENGINE
INTERNATIONAL DT 530E HEUI-300 hp
@ 2000/2200 rpm, 950 lb-ft torque @ 1050 rpm, wastegate turbo & air to air after-cooling
100 amp alternator
Two 12-volt 1100 CCA – maintenance free batteries
Vertical bright finish exhaust pipe
100 gallon fuel tank
Engine block heater - 1250 watt
HORTON declutching fan with on/off in-cab control
Air cleaner – dual element with pre-cleaner

AIR SYSTEM
BENDIX 13.2 cfm engine mounted water cooled air compressor
Dual air tanks
Air horn
Air dryer (BENDIX AD-9) with heater - BERG remote drain valve
Air brakes

TRANSMISSION
ALLISON MD3060P, 5-speed automatic
Transmission oil cooler & temperature gauge
FULLER AT-1202 2-speed air shift auxiliary transmission
Heavy duty SPL140 drive shaft & universal joints

REAR AXLE
MERITOR RS-38-380 double reduction
rated @ 38,000 lb
“W” wheel ends (cast spoke)
Gear ratio – 9.14
Rear springs – 31,000 lbs with 4,500 lb auxiliary

FRONT AXLE
MERITOR MFS-16 wide track, 16,000 lb
Power steering with dual H.D. steering gears
Front shock absorbers
Oil lubricated wheel bearings
6" lift kit

BRAKES
Front – 16.5" x 6"
Rear – 16.5" x 7"
Parking brake uses two rear brakes, spring applied & air released
Automatic slack adjusters

FRAME
Full length heavy duty 11" x 4" double
C-channel frame
Front frame extension – 20"
Front tow hooks

CAB
INTERNATIONAL with deluxe interior
Tilt and telescoping steering column
Pressurized - heat & air conditioned with filter
Windshield wipers with intermittent feature and washer
AM-FM-Cassette stereo with clock
SILVER WHEELS enhanced AirRide cab and AirRide seat
Tinted glass - all windows
Gauges include: air (dual), oil, amps, water temperature, tachometer, speedometer geared for flotation tires and hour meter
12-volt auto reset circuit breakers
Polyethylene front fender extensions
Electronic throttle & cruise control
Optional charcoal cab filter

PAINT
Cab - SIKKENS base coat with clear coat finish
Chassis - industrial long lasting urethane top coat

CAB & CHASSIS DIMENSIONS
Wheel base 187"
Cab to axle 112"
Cab to end of frame 183"
Overall length 310"
Overall width 135"
Overall height (top of cab) 114"

TIRE OPTIONS
GOODYEAR Front 48 x 25 x 20-10 ply
  Rear 66 x 43 x 25-10 ply
FIRESTONE Front 48 x 31 x 20-10 ply
  Rear 66 x 43 x 25-10 ply
GOODYEAR Front 48 x 31 x 20-10 ply
  Rear 66 x 43 x 25-10 ply
GOODYEAR Front 48 x 31 x 20-10 ply
  Rear 66 x 43 x 25-16 ply
GOODYEAR
Front 320/85 R34
(Row Crop) Rear 380/85 R46
    (90" tread width)
PRIMEX Front 48 x 31 x 20-12 ply
  Rear 66 x 43 x 25-12 ply
ALLIANCE Front 650/55R26.5 10,350 @ 44 psi
MICHELIN Rear 1050/50R32 15,810 @ 23 psi
FIELD SPEEDS
2200 rpm
GEAR
LOW RANGE
HIGH RANGE
1st 4.2 mph 8.5 mph
2nd 11.3 mph 23.1 mph
3rd 15.2 mph 30.0 mph
4th 21.6 mph
5th 29.9 mph

Note: Speeds can and will vary depending on tire sizes. CAUTION: These are agricultural tires. Do not exceed the tire manufacturer’s recommended speeds. Serious injury or death can result from sudden tire deflation or blowout!
7600 International Floater Chassis Specifications
ENGINE
CUMMINS ISM385V 370 HP @ 2100 RPM, 1350 lb-ft torque @ 1200 rpm, 385 peak hp, wastegate turbo & air to air after-cooling
110 amp alternator
Three 12-volt 1950 CCA – maintenance free batteries
Vertical bright finish exhaust pipe
100 gallon fuel tank
Engine block heater - 1500 watt
HORTON declutching fan with on/off in-cab control
Air cleaner – dual element with pre-cleaner
Idle shut-down timer

AIR SYSTEM
CUMMINS 18.7 cfm engine mounted water cooled air compressor
Dual air tanks
Air horn
Air dryer (BENDIX AD-9) with heater - BERG remote drain valve
Air brakes

TRANSMISSION
ALLISON HD-4560, 5-speed automatic with oil level sensor
Transmission oil cooler & temperature gauge
FULLER AT-1202 2-speed air shift auxiliary transmission
Heavy duty SPL140 drive shaft & universal joints

REAR AXLE
MERITOR PRC-673 double reduction rated @ 38,000 lb
Outboard planetary hubs
Gear ratio – 10.54
Rear springs – 31,000 lbs with 4,500 lb auxiliary

FRONT AXLE
MERITOR wide track 16,000 lb
Power steering with dual H.D. steering gears
Front shock absorbers
Oil lubricated wheel bearings
6" lift kit

BRAKES
Front – 16.5" x 6"
Rear – 16.5" x 7"
Parking brake uses two rear brakes, spring applied & air released
Automatic slack adjusters

FRAME
Full length heavy duty 11" x 4" double C-channel frame - 120,000 lb
Front frame extension – 20"
Front tow hooks

CAB
INTERNATIONAL with deluxe interior
Tilt and telescoping steering column
Pressurized - heat & air conditioned with filter
Windshield wipers with intermittent feature and washer
AM-FM-Cassette stereo with clock
SILVER WHEELS enhanced AirRide cab and AirRide seat
Tinted glass - all windows
Gauges include: air (dual), oil, amps, water temperature, tachometer, speedometer geared for flotation tires and hour meter
12-volt auto reset circuit breakers
Polyethylene front fender extensions
Electronic throttle & cruise control
Optional charcoal cab filter

PAINT
Cab - SIKKENS base coat with clear coat finish
Chassis - industrial long lasting urethane top coat

CAB & CHASSIS DIMENSIONS
Wheel base 189"
Cab to axle 114"
Cab to end of frame 187"
Overall length 316"
Overall width 135"
Overall height (top of cab) 117"

TIRE OPTIONS
GOODYEAR Front 48 x 25 x 20-10 ply
  Rear 66 x 43 x 25-10 ply
FIRESTONE Front 48 x 31 x 20-10 ply
  Rear 66 x 43 x 25-10 ply
GOODYEAR Front 48 x 31 x 20-10 ply
  Rear 66 x 43 x 25-10 ply
GOODYEAR Front 48 x 31 x 20-10 ply
  Rear 66 x 43 x 25-16 ply
GOODYEAR Front 48 x 25 x 20-10 ply
  Rear 66 x 43 x 25-16 ply
PRIMEX Front 48 x 31 x 20-12 ply
  Rear 66 x 43 x 25-12 ply
ALLIANCE Front
650/55R26.5
10,350 @ 44 psi
MICHELIN Rear 1050/50R32 15,810 @ 23 psi
FIELD SPEEDS
2100 rpm
GEAR
LOW RANGE
HIGH RANGE
1st 2.0 mph 4.2 mph
2nd 7.9 mph 16.1 mph
3rd 11.6 mph 23.7 mph
4th 17.9 mph
5th 23.7 mph
Note: Speeds can and will vary depending on tire sizes. CAUTION: These are agricultural tires. Do not exceed the tire manufacturer’s recommended speeds. Serious injury or death can result from sudden tire deflation or blowout!
.
© Copyright 2007 by Miller Application Technologies, a Miller-St. Nazianz, Inc. Company